Defender PF Discharge Piping System - Press Fittings and Pipe
8126 Bend Adp. With Male Thread 90° (15x3/8"x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength: 490-690 N/mm2
- Yield resistance Rp: 0,2:≥ 190N/mm2
- Standart: DVGW W534
8118 T-Piece Equal (15x15x15x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp 0,2 : ≥ 190N/mm2
- Standart : DVGW W534r)
8119 Bend 90° (15x15x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp : 0,2:≥ 190N/mm2
- Standart : DVGW W534
8125 T-Piece With Male Thread (15x3/8"x15x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp : 0,2:≥ 190N/mm2
- Standart : DVGW W534
8121 Adaptor With Male Thread (15x3/8"x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp : 0,2:≥ 190N/mm2
- Standart : DVGW W534
8123 Adaptor With Union Nut (15x3/8"x1,5 mm )
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance : Rp 0,2:≥ 190N/mm2
- Standart : DVGW W534
8124 Bend 45° (15x15x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp : 0,2:≥ 190N/mm2
- Standart : DVGW W534
8120 Coupling (15x15x1,5 mm)
The pressfittings are made of AISI 316L/AISI 304L/ AISI 304. The diameter ranges from 15 mm. Pressfittings have been certified German Standard DVGW W 534.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp : 0,2:≥ 190N/mm2
- Standart : DVGW W534
8127 15mm Pipe Compression Seal (8128: 3/8", 8129: 1/2")
The pipe compression seal adapter is designed to stop leakage of grease from inside the hood or duct to outside the hood or duct at the hole created for the fire suppression system piping. The compression seal accepts pipe or conduit with threaded ends.
- Fireproof and Leakproof Klingrit gasket
- Knurled washer for easy assembly
- Chrome nickel plating against corrosion
- Internal diameter threaded or unthreaded option
8117 Stainless Steel Pipe (15x1 mm) (Polished)
Pipes used in mains systems are made of austenitic stainless AISI 316L/304/304L, according to Standards UNI EN 10088-2, UNI EN 10217-7 and UNI EN 10312. Generally they are commercially available and sold in 2 metres lengths.
Austenitic stainless steel X2 CrNiMo 17-12-2 n.1.4404 (AISI 316L) according to UNI EN 10088-2, UNIEN 10217-7 and UNIEN 10312
- Tensile strength : 490-690 N/mm2
- Yield resistance Rp : 0,2:≥ 190N/mm2
- Standart : DVGW W534
Benefits Summary
- %60 less cost according to equivalent piping cost
- Less installation time and labour cost
- No clamp, electric threading machine, hand clipper, cutting oil
- No threading time, liquid gasket or Teflon cost
- No pipe and fittings handling difficulties
- No Corrosion
- Blue Seal for checking proper fixing
Applications
- Kitchen Fire Suppression Installations
- Drinking water installations
- Hot water heaters
- Local and district heating tubes
- Thermal solar systems
- Water-based air-conditioning systems
- Rainwater harvesting systems
- Compressed air (oil-free)
- Industrial and process water